虽然它是一种金属，它也会受到损坏，无论什么硬质材料都会受到损坏，但损坏的程度并不相同。众所周知，徐州NSK轴承质量好，钢性好。钢是一种非常坚固的材料，但是它也可能被损坏。机器上的轴承每天都运转。摩擦力恒定，轴承容易损坏。因此，我们还需要防止轴承损坏，维护轴承，不要乱用它们，给自己造成不必要的损失。

Although it is a metal, it will also be damaged, no matter what hard material will be damaged, but the degree of damage is not the same. As we all know, Xuzhou NSK bearings are of good quality and steel. Steel is a very strong material, but it can also be damaged. The bearings on the machine run every day. Friction is constant, bearing is easy to damage. Therefore, we also need to prevent bearing damage, maintain bearings, do not use them indiscriminately, causing unnecessary losses to ourselves.

为了保证安装过程中会产生过大的变形，我们还必*须从这些方面着手，对于双列深沟球轴承需要做很多事情，下面需要注意徐州NSK轴承的影响。

In order to ensure that the installation process will produce excessive deformation, we must also start from these aspects, for double row deep groove ball bearings need to do a lot of things, the following need to pay attention to the imPACt of Xuzhou NSK bearings.

现象：

Phenomenon:

1)发动机怠速时无明显噪声，但发动机以中高速(曲轴箱)运转时，会发出“咯咯”声。

1) There is no obvious noise when the engine idles, but when the engine runs at medium and high speed (crankcase), it will produce a "cackle" sound.

2)紧急加油后油门开*锁时，声音更加明显。

2) When the throttle is unlocked after emergency refueling, the sound is more obvious.

3)温度变化不明显。随着负载的增加，声音增加。

3) The change of temperature is not obvious. As the load increases, the sound increases.

4)徐州NSK轴承声音比声音慢而且短。

4) Xuzhou NSK bearings sound slower and shorter than the sound.

Diagnosis：

Diagnosis:

1)当发动机转速从怠速变为中速时，声音清晰。随着转速的提高，轴承噪声越来越突出。

1) When the engine speed changes from idle to medium speed, the sound is clear. With the increase of rotational speed, bearing noise becomes more and more prominent.

2)气缸耐火试验，噪声降低或消失，即轴承噪声。

2) Cylinder fire resistance test, noise reduction or disappearance, that is, bearing noise.

3)无论速度或温度是高还是低，它发出声音，发动机振动。如果火试的声音没有改变，合金将被烧蚀。

3) Whether the speed or temperature is high or low, it makes sound and the engine vibrates. If the sound of the fire test does not change, the alloy will be ablated.

当我们使用徐州NSK轴承时，我们必*须注意轴承的清洁度，这对我们很重要。当我们使用轴承时，我们的轴承需要清洗一段时间。在日常清洗中，不能使用碱性溶液，以免轴承内部碎片引起滑块开裂。我们还需要注意轴承的润滑，这也是非常重要的。

When we use Xuzhou NSK bearings, we must pay attention to the cleanliness of bearings, which is very important to us. When we use bearings, our bearings need to be cleaned for a period of time. In daily cleaning, alkaline solution should not be used to avoid slider cracking caused by internal debris of bearing. We also need to pay attention to the lubrication of bearings, which is also very important.

使用时，发现润滑可以减少轴承和机械之间的摩擦。这对我们的轴承也有很大的好处。我们不应该忽视它。这两点将大大提高你在使用过程中使用的徐州NSK轴承周期，这将大大延长你的使用周期，所以我们必*须注意这两点。

When used, it is found that lubrication can reduce friction between bearings and machinery. This is also of great benefit to our bearings. We should not ignore it. These two points will greatly improve the cycle of Xuzhou NSK bearings you use in the process of using, which will greatly prolong your service life, so we must pay attention to these two points.

文章来自：徐州SKF轴承 www.wh-skf.com

Article from: Xuzhou SKF Bearing www.wh-skf.com

文章来自：徐州INA轴承 www.ina-china.cn

Article from: Xuzhou INA Bearing www.ina-China.cn

文章来自：徐州NSK轴承 www.klbbearings.com

Article from: Xuzhou NSK Bearing www.klbbearings.com

QQ：524085168

电话：0510-81207777

手机：13311666672/13395185757