如果上述两种情况不好，则轴和徐州SKF轴承箱的精度差，轴的偏移量大。看到这一点，我想每个人都想知道解决方案。首先，对润滑油及润滑方法进行了研究。选择合适的润滑剂及其用量，选择合适的轴承。检查车轴和轴承箱的精度。如果你身边有专家，让他跟着你学**好的！后期会出现结构不合理、数据质量差、性能差、任务外观、冲击、振动、装置不当、平滑度差等缺点，形成有*效的徐州SKF轴承。然而，在某些情况下，一些进口轴承尚未投入使用（运行），但用户的原始外观在安装过程中受损，可用性丧失，轴承的形成过早生效。

If the above two conditions are not good, the accuracy of the shaft and Xuzhou SKF bearing box is poor, and the offset of the shaft is large. Seeing this, I think everyone wants to know the solution. Firstly, the lubricating oil and lubricating methods are studied. Choose the appropriate lubricant and its dosage, select the appropriate bearing. Check the accuracy of axle and bearing box. If you have an expert around you, let him follow you. Later, there will be unreasonable structure, poor data quality, poor performance, task appearance, imPACt, vibration, improper device, poor smoothness and other shortcomings, forming an effective Xuzhou SKF bearing. However, in some cases, some imported bearings have not been put into use (operation), but the original appearance of the user is damaged in the installation process, the usability is lost, and the formation of bearings takes effect prematurely.

它在基体连续性、偏析性和脆性方面与碳化物带具有相同的作用。大大降低了马氏体基体的色浓度差，提高了环的显微硬度，改变了环在调质条件下综合力学性能的蓬松缺点。

It plays the same role as the carbide band in matrix continuity, segregation and brittleness. The color concentration difference of martensite matrix is greatly reduced, the microhardness of the ring is improved, and the flabbiness of the comprehensive mechanical properties of the ring under quenched and tempered conditions is changed.

根据徐州SKF轴承安装、使用和维护的技术要求，对运行中轴承的负荷、转速、工作温度、振动、噪声和润滑情况进行监测和检查。立即发现异常原因，调整后恢复正常操作。此外，分析和测试润滑脂的量以及周围的介质和大气也很重要。

According to the technical requirements of installation, use and maintenance of Xuzhou SKF bearings, the load, speed, working temperature, vibration, noise and lubrication of bearings in operation are monitored and inspected. The abnormal cause was found immediately and normal operation was resumed after adjustment. In addition, it is also important to analyze and test the amount of grease and the surrounding medium and atmosphere.

调心球轴承失效的内在因素主要是结构设计、制造工艺和材料质量。

The internal factors of the failure of self-aligning ball bearings are mainly structural design, manufacturing process and material quality.

分析调心球轴承失效原因的主要任务是根据大量的背景资料、分析数据和失效形式，找出造成轴承失效的主要因素，并提出改进措施，延长徐州SKF轴承的使用寿命，避免轴承突然早期失效。

The main task of analyzing the failure causes of self-aligning ball bearings is to find out the main factors causing the failure of bearings based on a large number of background information, analysis data and failure forms, and put forward improvement measures to prolong the service life of Xuzhou SKF bearings and avoid sudden early failure of bearings.

文章来自：徐州SKF轴承 www.wh-skf.com

Article from: Xuzhou SKF Bearing www.wh-skf.com

文章来自：徐州INA轴承 www.ina-china.cn

Article from: Xuzhou INA Bearing www.ina-China.cn

文章来自：徐州NSK轴承 www.klbbearings.com

Article from: Xuzhou NSK Bearing www.klbbearings.com

QQ：524085168

电话：0510-81207777

手机：13311666672/13395185757